Label and store your piece
How to mark pottery with your member number and choose the correct shelf.
your first visit / studio rules
Visiting us for the first time? Find all the practical information for your first visit and the rules for sharing the studio. We’ll take you through booking, getting in, making, storing your work, cleaning up and collecting your pottery.
Go straight to what you need
First time here? Start by choosing your studio and type of visit, with time for both making and cleaning.
Our self-service studios are for people with some pottery experience. If you are starting out, you can learn the basics in a guided class and then return to work independently.
There is no minimum age. Children under 15 must come with an adult responsible for their safety. The same prices apply to children and adults.
Your customer account contains the member ID you use to label pottery. Select a studio, time and number of people when booking. Check current prices, capacity and booking type in the booking system. Contact us first about larger groups.
Grohova is open 24/7. Václavská is open daily 06:00–00:00. Visits to both studios require a booking for a specific time.
Pay online in advance using the card or customer-credit options offered by the booking system. You can extend your visit only if time is available. We release classes gradually, usually 1–2 months ahead.
Have your entry instructions ready. Each studio has its own layout.
Your entry code arrives by email and is valid during your booking. Follow the instructions for your studio and keep the code private. Contact us if you cannot find it or cannot open the door.
If the gate is closed, carefully lift it and slide it left. Enter your code on the keypad and wait a few seconds for the door to unlock. If you leave during your visit, lock the door using the triangle on the keypad.
A wireless speaker, sink and toilet are available. Take only your own pottery home, never materials or studio equipment. The studio is monitored by cameras.
A few careful steps help protect your work and our shared kiln.
Only our tested clay, glazes and other materials may go into the kiln. Do not use your own materials: materials that need different temperatures can damage pottery, kiln shelves or the kiln.
Choose from the clay types provided. Use the amount you need, but avoid waste and do not take clay home. Carefully wrap opened packets and seal them with tape after use so they do not dry out.
Keep walls approximately the same thickness. Enclosed forms and sculptures must be hollow with at least a small opening. Thoroughly remove paper supports, masking tape and other temporary materials before firing.
Do not open or move the kiln, or put anything on it. Our team operates the kiln and handles firing.
Unfinished work needs to stay damp. Finished work needs to dry.
Carefully label every piece with the ID from your account. Use the number stamps on its underside. We cannot identify or process unlabelled work, so it is recycled.
Label unfinished pieces and work waiting for trimming, wrap them carefully in plastic and place them on the work-in-progress shelf. Ideally book your next visit within 7 days so you can continue working with the clay.
Label finished and trimmed pieces and put them on the appropriate shelf without plastic. We treat labelled, unwrapped pieces as finished and fire them once dry.
Always follow the shelf labels in your studio. At Grohova, the stages run from bottom to top: work in progress → drying → awaiting bisque firing → bisque fired → glazed → finished.
Glaze melts in the kiln. A clean base and the right thickness matter.
Apply glaze only to bisque-fired work. Engobes can also go on raw clay before its first firing. Engobes and ceramic pencils always go under the glaze. Underglaze colours and basic oxides are also available.
Stir glazes and engobes well before use. Do not change their consistency or dilute them with water. Use a clean brush and mixing spatula for each colour to keep the containers free of other colours.
Lightly wipe the piece with a damp, not wet, sponge to remove dust and dirt from the surface.
Glaze is normally brushed on in two coats. A layer that is too thick can run or crack in the kiln. Use the glazes in white buckets for pouring, filling and dipping.
The entire surface that touches the kiln shelf must be clean. Carefully remove glaze from it and from a band approximately 4 mm above the base with a damp sponge. This prevents your piece sticking to the kiln shelf.
glazed surface
clean base
about 4 mm without glaze
Clean the whole contact surface and the band above it. Glaze must not touch the kiln shelf.
Someone may arrive immediately after you. Finish cleaning within your booked time.
Allow at least 15 minutes for cleaning. Switch off the wheel before cleaning, wash your work surfaces and tools, and put everything back. Leave nothing in the sink. Wipe surfaces damp to avoid raising dust.
Put dry scraps and unsuccessful pieces in the container for that clay type. Wet clay and slip from the wheel go into the wet-clay containers; keep clay types separate. At Grohova, viewed from the entrance, dry containers are under the table on the left and wet ones on the right.
Large amounts of clay block drains, so remove clay into the containers first. Pour washing water containing remaining clay slowly into the sink so its settling tank can drain. Never put clay in the toilet: it risks damage and a fine of up to CZK 5,000.
Check that the pottery wheel and fan are off before leaving. Turn off all the lights.
Secure the studio according to its instructions. At Grohova, wait for the door to close fully, press the triangle on the keypad and check that the door is locked. If you are the last to leave in the evening, carefully close the gate too.
We will let you know when your piece is ready for its next step.
We email you when your work is ready to glaze and when it is finished. Book the visit for that step only after receiving the notification. The collection email includes instructions.
You can collect finished work during your next studio visit. If you do not plan to visit soon, contact us to arrange collection individually.
Czech audio · filmed at Grohova
Short practical videos filmed at Grohova, with Czech speech. Václavská has a different layout: follow its signs and the instructions in your booking.
How to mark pottery with your member number and choose the correct shelf.
How to use the recycling containers for clay scraps.
A quick final check and locking the door at Grohova.
The YouTube player loads only after you press play. Playing a video connects you to YouTube.
all tips & guidesIf you are unsure about a technique, material or where to leave your pottery, email or call us. We are happy to help.